- DRILL-IN FLUID SYSTEMS
- FRACTURING FLUID ADDITIVES
- FRACSAL SYSTEM
- LOST CIRCULATION SYSTEMS
- SUPPLEMENTAL ADDITIVES
- SYSTEM STABILIZERS
Solukleen additives are a blend of polymers, calcium lignosulfonate and specially sized oil-soluble resin particles. The two basic products, Solukleen which contains hydroxyethyl cellulose and Solukleen Ultra which is formulated with xanthan gum biopolymer are packaged in 25 lb sacks.
Solukleen functions in sea water or salt solutions such as potassium chloride, sodium chloride, and calcium chloride.
Solukleen Ultra features increased low shear rate viscosities in sea water, and brines such as potassium and sodium chloride.
Solukleen and Solukleen Ultra are designed for use in completion and workover operations where oil-soluble resins are desired to minimize damage to productive formations. Applications may include the following operations:
A clean, oil free pit equipped with a standard mud hopper and at least two sub-surface guns is suggested for mixing. Base fluid should be pre-treated with a defoamer (Defoam 2), and Solukleen and Solukleen Ultra should be mixed through a hopper at 3 - 5 minutes per sack. Circulate the pit at least 30 minutes before pumping downhole.
Care must be exercised to avoid contamination of the Solukleen and Solukleen Ultra with oil as this could adversely affect fluid performance.
|Solukleen||Hydroxyethyl cellulose, derivatized starch, magnesia compound, calcium lignosulfonate, sized resin (74 microns)||Viscosifier, fluid loss control additive|
|Solukleen Ultra||Xanthan gum biopolymer, derivatized starch, magnesia compound, calcium lignosulfonate, sized resin (74 microns)||Viscosifier, fluid loss control additive|
|FL-7 Plus®||Derivatized starch||Fluid loss control additive|
|Solubrige Fine, Solubrige, Solubrige Mid, Solubrige Coarse||Fine to coarse resin||Bridging/lost circulation additives|
|pH Buffer||Magnesia compound||Buffer to maintain alkaline pH|
|Defoam 2||Water miscible glycol mixture||Defoamer|
D-50 PARTICLE SIZE & THEORETICAL SEALING CAPABILITY
|PRODUCT||D-50 (microns)||PORE THROAT SIZE (microns)||PERMEABILITY (mD)|